|
We are proud to announce our new "Commanche" co-axial, dual rotor, single mast
kit. It comes very complete and is a hoot to
fly! Designed for the intermediate gyro pilot, all
sorts of wild manuevers
can be flown!
Available now are a few
"import" kits. Each has been thoroughly flight
tested and presented with some reservations. We have
added a new feature to this page, informing customers of our
findings from extensive testing on these. Each design
will have a "Specs", "Recommendations" and "Reservations"
listing. Please study carefully before placing an order to
insure a correct choice is made matching your building and
flying skills. If you are new to autogyros, we
recommend the "Twirl" to
start.
We are always
available email to answer all of
your questions.
Email: Click
Here
Toll-Free Orders:
1-888-783-0101
_______________________________________________________________________ |
"Commanche" Kit
(Click images for larger
view)
  
(Photos and
Video by Charles Beverson)
Click above for Flight
Videos
|
Specs:
17.5" Rotor Disk
Diameter; 23" long. Weighs only 7 oz. ready to fly!
3-channel operation; no mixing needed.
Outrunner electric
power (Motor, ESC, Prop, 2 Micro Servos +
LiPo battery included in
"Combo")
Recommendations:
Fly at the
local park. Remarkably wide flight envelope and can
be wildly aerobatic for the experienced gyro pilot.
Takeoff from the ground in nearly any wind conditions.
Kit comes complete with all pre-cut
foam
and carbon parts, hardware, hinge tape, wheels,
cockpit graphics, even UHU
glue!
Complete with detailed and illustrated
Construction/Flying Manual.
Choose the
"Combo" and get the kit + 2 micro Servos, Outrunner Motor,
ESC, LiPo battery pak, and prop.
Reservations:
First-time gyro flyers or novice pilots
would do better starting out with the
"Twirl", twin-rotor, side-by-side kit.
(Below)
The Commanche design
is quite active in roll and for the intermediate to
advanced pilot, an attribute! Lots of
"gyrations!" |
Kit: Includes Laser-Cut foam,
carbon parts, blades, UHU glue, hardware, motor mount,
wheels, hinging tape, manual...$ 75.
"Combo": Includes above Kit + 2 Micro Servos,
Outrunner Motor, ESC, LiPo pak & Prop.............................................
$159.
Email: Click Here Toll-Free Orders:
1-888-783-0101
___________________________
______________________
"Twirl" Kit
(Click images for
larger view)
  
(Click images for larger
view)
 
(Photos and Video by Charles
Beverson)
Click above for Flight
Videos
|
Specs:
14.5" Rotor Disk Diameter x 2 = 30"
Rotor Tip to Rotor Tip! 26" long. Weighs only 5 to 7 oz.
ready to fly!
3-channel operation; no mixing needed.
Outrunner electric power
(Motor, ESC, Prop, 2 Micro
Servos + LiPo battery included in
"Combo")
Recommendations:
Comfortable flying at
the local park or great for "Indoor." Remarkably wide
flight envelope. Perfect for first-time gyro flyers and
mildly aerobatic for the experienced gyro pilot looking for
something a little different. Takeoff from the ground in
nearly any wind conditions. Kit comes complete with all pre-cut foam and
carbon parts, hardware, hinge tape, wheels, even UHU
glue! Complete with detailed and illustrated
Construction Manual.
well-designed rotor system.
By far the
one of the easiest and best flying model autogyro kits on the
market; very stable and controllable even in winds.
Choose the "Combo" and get the kit + 2 micro
Servos, Outrunner Motor, ESC, LiPo battery pak, and
prop.
NO
Reservations!!! |
Kit: Includes Laser-Cut foam, carbon parts, blades, UHU glue,
hardware, motor mount, wheels, hinging tape,
manual...$ 75.
"Combo": Includes above Kit + 2 Micro Servos,
Outrunner Motor, ESC, LiPo pak & Prop.............................................
$159.
(Click
cover photo
for Review!) (Photo by FlyRC
magazine)
Email: Click Here Toll-Free Orders:
1-888-783-0101
___________________________
______________________
Cierva "C.30" Foam "ARF"
Kit
(Click images for larger
view)
Click above for Flight
Video
(Photos and Video by Charles
Beverson)
|
Specs:
Rotor Diameter: 27"; Length:
21"; Weight: 14 oz; Molded Foam, pre-painted; Dual Axis Direct
Control;
Motor: 1100kv Outrunner w/ESC; 3-cell, 11.1v, 1320
LiPo Battery; 8 x 3.8 APC prop
Recommendations:
Very
attractive model; offered in two color/marking
versions; pre-painted, molded foam fuselage nearly
perfect;
dummy radial engine kit, pilot, decals and
scale-like landing gear included; well-designed rotor
system;
one of the best flying model autogyro kits on
the market; very stable and controllable even in winds;
predictable.
Reservations:
Not really an ARF; text
in construction "pamphlet" nearly indecipherable;
build is completed using images in "manual";
no real
information on proper tilt-back angle, hang angle, etc.;
will probably require tech support assistance
(which we
offer free to all our
customers) |
|
French Version (Blue) Kit |
Spanish Version (Silver)
Kit |
|
Complete Kit
("ARF")....................................................................................................................$169. |
|
"Combo" Kit ("ARF") (Above + 1100kv brushless motor, ESC and 2 micro
servos.................................................................$239.
Email: Click Here Toll-Free Orders:
1-888-783-0101 | ____________________________
______________________
"Rainbow"
Kit
(Click images for larger view)
Click above for
Flight Video
(Photos and Video by
Charles Beverson)
|
Specs:
Rotor Diameter: 42"; Length:
38"; Weight: 23 oz; Carbon Tailboom; Balsa/Py
construction; Single Axis Direct Control;
Required power:
equivalent of Hacker A-20-20L Outrunner w/20 amp
ESC;
3-cell, 11.1v, 2100mAh LiPo Battery; 10 x
5E APC prop
Recommendations:
Good trainer for first-time gyro
pilots; takes off from ground very well in light winds; quick
building kit; has wide speed range
Reservations:
Text in construction
"pamphlet" nearly indecipherable; build is completed
using images in "manual"; rotor rpm
quickly deteriorates at
high angles of attack; "pod & boom" aesthetic; will
probably require tech support assistance
(which we offer
free to all our
customers) |
|
"Preassembled"
ARC Kit
..............................................................................................................$179.
"Combo":
above kit + Hacker A20-20L Brushless Outrunner w/"X-20"
20 amp controller + prop............$289.
Email: Click
Here Toll-Free Orders:
1-888-783-0101 | _____________________________
______________________
"Soda
Pup-E" Kit
 |
(Click image for larger view) (Photo by
FlyRC magazine) |
This design is a Sport Scale model of the
Rotorwerk’s "Pit Bull" tractor
gyrocopter
  
(Photos by
Charles Beverson)
Balanced
Pack!
(Click for
Close-up)
 
Click above for flight videos
(Videographer:
Charles Beverson)
-
48" Rotor Disk Diameter, less than 26"
long! Weighs in at less than 2 lb., keeping
the Disc Loading less than 3oz/ft.sq.!
4-channel
operation; no mixing needed. Outrunner electric power
(recommended motor size listed below)
-
Comfortable flying at the park or local flying
field. Remarkably wide flight envelope. It has proven
incredibly stable for the first-time gyro flyer (won’t bite)
and mildly aerobatic for the experienced gyro pilot looking
for something a bit less tame. (Still won’t bite
hard.)
-
Kit uses a simple, internal
structure design of laser cut balsa and ply with laser slots
and tabs ensuring accurate assembly. When constructed, this
structure holds motor, controller, LiPoly pak, receiver and
servos. The smooth, outer body of the "Soda Pup-E"
is composed
of 2-liter pop bottles! This outside "shell" is
interchangeable, allowing many painted and decorated pop
bottle "bodies" to exchange for a variety of color &
markings without the expense of building a completely new
model.
-
Included in all
kits is a rolled, laser-plotted plan sheet and for
those having already built an AUTOGYRO COMPANY of
ARIZONA design, the notable high-quality, detailed
construction/flying manual contains numerous construction
photos making building this kit a "walk in the doggie park."
As usual, over a third of the manual is devoted to the
basics of autorotational flight and includes proven flight
instruction. The kit is offered three
ways:
-
"Bare
Bones": basic laser kit; all wood parts, blades,
rotor bearing, limited
hardware.....$169.
-
"Bare Bones with
Kibbles": basic "bare bones"
laser kit with all finishing
hardware.......
$199.
-
"Bare Bones with Kibbles &
Bits": "Kibbles" kit with
outrunner motor/controller/prop:
We
stock Cermark outrunner
motor/controller combos for the "Soda
Pup-E". We also
carry LiPoly battery paks in many
configurations to power our electric kits.
Add the electronics to your kit for a
complete package:
*
CERMARK "2820-1200"; 36A ESC, APC 10x5E
Prop, Prop Adapter and "X"
mount...............$139.
|
(Click cover
photo
for Review!)
|
(Click image for larger view) (Photo by
FlyRC
magazine)
|
Email: Click
Here Toll-Free:
1-888-783-0101 |
___________________________
______________________
HOME |
